Commercial Handwashing with Added Splash Containment
This commercial hand wash sink with splash guard is designed for indoor food-service, medical, retail, education, health-and-beauty, and other professional environments where hot-and-cold handwashing and added splash containment are useful. The 17-inch stainless steel guard wraps around the back and sides of the counter and includes a mounted paper-towel dispenser.
A 5-gallon freshwater tank, separate wastewater tank, SHURflo electric pump, and Stiebel Eltron Mini 2.1 tankless heater are housed inside the cabinet, supplying pressurized hot and cold water without a permanent water connection.
Want to compare this configuration with other basin, heater, and cabinet styles? Browse all our mobile handwashing stations across the full lineup.
When Is the Splash Guard Model the Better Choice?
Choose the Splash Guard model when you want the stainless steel Pinnacle platform with a taller backsplash around the handwashing area. The guard helps contain water around the counter, while the mounted paper-towel dispenser keeps hand-drying supplies at the station. Four locking swivel casters allow the unit to be repositioned within appropriate indoor spaces and secured during use.
If you do not need the added guard or towel dispenser, see the Pinnacle Stainless Steel Hand Wash Station, which uses the same general platform in a simpler configuration.
Stainless Steel Basin and Tankless Hot Water
The single basin is made from 22-gauge 18/8 stainless steel and sits in a stainless steel counter with an integrated liquid-soap dispenser. Hot water is supplied by a Stiebel Eltron Mini 2.1 tankless heater with an adjustable 86°F–122°F range. A SHURflo demand pump supplies pressurized water, while wastewater drains into the separate holding tank.
Setup and Electrical Requirements
The station is pre-plumbed and pre-wired. Final setup includes installing the splash guard with the supplied stainless steel bolts, attaching the faucet components and door handles, connecting the quick-connect hose, filling the freshwater tank, and connecting the unit to electrical service that meets the product’s requirements before operation begins. This model is intended for indoor use only.
Product Specifications
|
Specification
|
Value
|
|
Water
|
Hot and cold
|
|
Water Heater
|
Stiebel Eltron Mini 2.1 tankless electric heater, 1,800W / 15A
|
|
Temperature Range
|
Adjustable 86°F–122°F
|
|
Freshwater Tank
|
5 gallons
|
|
Wastewater Tank
|
Included; 15% larger than freshwater tank
|
|
Power
|
20A power cord with GFCI protection
|
|
Basin
|
22-gauge 18/8 stainless steel; 11⅞" W × 10⅞" L × 5¾" D
|
|
Splash Guard & Dispenser
|
17" stainless steel guard around back and sides; mounted paper-towel dispenser
|
|
Cabinet
|
Stainless steel with laminate doors; 26" L × 18¾" W × 38⅝" H, including casters and excluding faucet and splash guard
|
|
Weight & Mobility
|
Approx. 93 lb; four 5" locking swivel casters; indoor use only
|
|
NSF Status
|
Counter and basin meet stated NSF standards; pump, water lines, and connectors carry component-specific NSF references
|
Frequently Asked Questions
Q: What does the Splash Guard model add compared with the standard Pinnacle?
A: It adds a 17-inch stainless steel splash guard and mounted paper-towel dispenser.
Q: What electrical service does this station require?
A: The tankless heater is rated at 1,800W/15A, and the unit includes a 20A power cord with GFCI protection.
Q: How much setup is required?
A: The station is pre-plumbed and pre-wired. Final setup includes installing the splash guard with the supplied stainless steel bolts, attaching the faucet components and door handles, and filling the freshwater tank.
