Hidden Trailer Hitch for 2014 to Present Harley-Davidson Touring Motorcycles

Great product. I question the instructions a little bit only that when putting things back together, I as a bit lost on where the struts go and do to the lack of pictures, it was a bit of guess work to figure out. I did find an online video and that proved to help me complete the task. I am finding that I'll need to add an extended Ball "2in" for my bike is lowered by an 1" and even placing the hitch all the way to the last hole, I still needed to raise the Tung. Not your fault

Took my time and followed the instructions. Went great till apparently misinterpreted step 11E and placed the hitch mounting tab on the forward parts of the fender support tab. Made sense, black hitch tab would be hidden behind the chrome bracket. All wrong, hitch was 1/8 from tire, had to disassemble and place the black tab to the rear of bike. Instructions are multi-product / multi-bike black and white photocopied and images are useless. Like the product, hate the paperwork.

Excellent product...it's hidden under the fender ...fairly easy instalation if your mechanical inclined ...works great if you have rails around your saddle bags where as other hitches wanted to bolt up in front of the attachment point at the bottom but not enough room due to the rails attached there also...top notch customer service ...received the wrong receiver part and immediately made it right and shipped out the right part ....I put this on an 2020 electra glide standard police bike (with all the saddle bag trim and rails )....highly recommended

This hitch fits under and behind the fender. It is hidden from view whenever I disconnect the ball hitch.

Excellent fit very easy to install following step by step easy to follow directions.

So, the trailer hitch and all components are top notch and $100. less than its competitor's design. Shipped in great time and packaged very well. However, this is where it becomes a real pain to install. First there needs to be downloadable instruction to supplement the packaged ones. Because the instructions are extremely detailed, it is a bit confusing to wrap your head around which is why i wound up installing and disassembling the rear fender multiple times to get it right. Not in the instructions was dealing with my Road King taillight/ turn signal assembly which would not clear the mufflers. I figured that I would unbolt it from the underside of the fender, but then realized after reinstalling the fender that the bolts were not accessible with the hitch in the way...UGH! even though I taped everything for protection, I still wound up with a scratched fender on a new bike! What you really need to do is remove the chrome upright saddlebag supports to facilitate easier removal of the fender, more especially if you have the combined taillight/turn signal assembly. After all was said and done, I spent about 10 hours struggling with the install over 5 days after work and Walaa, I can now tow my trailer and it does tow very well. Everything works as expected but beware of the installation process. Hey USA Trailer, how about a detailed install video for the newer Harley Touring models! That might help along someone new to this install.

hitch is well built. fits good. instructions are hard to follow. pictures are black and white and dark. hard to see any details. other than that great product. would recommend.

I have a Harley that has a black out trim package and I wish you offered a black hitch instead of chrome. It kind of sticks out.